Key Specifications

• Core: ARM Cortex-M7, 32-bit, up to 216 MHz

• Flash Memory: 1 MB

• RAM: 340 KB total (320 KB system SRAM, 16 KB instruction SRAM, 4 KB backup SRAM)

• Package: 100-pin LQFP (14 × 14 mm)

• Operating Voltage: 1.7 V to 3.6 V

• Operating Temperature: -40°C to +85°C

• I/O Pins: 82

• Data Converters:

  • 3 × 12-bit ADCs (up to 2.4 MSPS)

  • 2 × 12-bit DACs

• Timers: Up to 18 timers (general-purpose, advanced control, basic, and low-power)

• Connectivity Interfaces:

  • Ethernet MAC

  • USB OTG FS/HS

  • 2 × CAN 2.0B

  • 4 × I²C

  • 4 × USART / 4 × UART

  • 6 × SPI (3 with I²S support)

  • 2 × SAI, SPDIFRX, HDMI-CEC, SDMMC

• Graphics Support:

  • LCD-TFT controller up to XGA resolution

  • Chrom-ART Accelerator (DMA2D)

• Camera Interface: 8- to 14-bit parallel interface supporting up to 54 Mbytes/s

• Security Features:

  • Cryptographic hardware acceleration (AES, 3DES, SHA-1, SHA-2, MD5, HMAC)

  • True Random Number Generator (TRNG)

• Debug Interfaces: SWD, JTAG, and Cortex-M7 Trace Macrocell™

Applications

The STM32F756VGT6 is suitable for a wide range of applications, including:

• Industrial control systems

• Medical devices

• Consumer electronics

• Portable and wearable devices

• Audio and video processing

• Internet of Things (IoT) applications

Additional Resources

For more detailed information, you can refer to the following resources:

• STM32F756VGT6 Product Page – STMicroelectronics

• STM32F756VGT6 Datasheet

If you need assistance with development tools, evaluation boards, or have further questions about this microcontroller, feel free to ask!

Key Specifications

• Memory Type: EEPROM (Electrically Erasable Programmable Read-Only Memory)

• Capacity: 2 Mbit (256 Kbytes)

• Interface: I²C bus, supporting Standard (100 kHz), Fast (400 kHz), and Fast-mode Plus (1 MHz)

• Operating Voltage: 1.6 V to 5.5 V

• Operating Temperature: -40°C to +85°C

• Write Cycle Time: Typically 3.3 ms, maximum 4 ms

• Access Time: 450 ns

• Data Retention: Over 200 years

• Endurance: More than 4 million write cycles

• Package: 8-pin SOIC (SO8N), tape and reel packaging

• Part Status: Active

Features

• Configurable Device Address (CDA): Allows dynamic assignment of I²C addresses, facilitating multiple devices on the same bus

• Software Write Protection (SWP): Enables selective write protection via software commands

• Device Type Identifier (DTI): Read-only register providing device identification

• Identification Page: Additional 256-byte memory page that can be permanently locked for storing sensitive data

• Low Power Consumption:

  • Standby: ~350 nA

  • Read: ~100 µA

  • Write: ~500 µA

• Enhanced ESD and Latch-Up Protection: Improves device reliability in harsh environments

• Fast Wake-Up Time: Less than 5 µs, suitable for low-power applications

This EEPROM is ideal for industrial, consumer, and automotive applications that require reliable and configurable non-volatile memory. For detailed specs, refer to the STMicroelectronics datasheet for M24M02E-F.